The weight limit for both Current EXP and ADV is 300lbs.

The bike will come with tubes installed, but is still considered Tubeless Ready! "Tubeless Ready" means a few things. First, the wheels and tires are both tubeless ready, meaning that tires can bead directly into the rim of the wheel. Second, the wheels come taped for tubeless so the sealant (the fluid that seals small punctures) doesn't seep through the spoke holes. To set up your tubeless tires, please see our helpdesk.

The Current EXP and ADV eMTBs are built to standard industry spec, with included hangers for non-Transmission drivetrains. The headtube will accept any tapered fork and you can route any seatpost you desire, as long it is the correct diameter. The wheels are standard boost spacing and the headset is a ZS56 upper and lower, meaning that you can even run an angleset headset for a more customized ride.

The Current is built on a trail bike platform, meaning that it will handle a majority of trails. We have tested the Current on everything from green flow to double-black diamond downhill trails, and it's taken them on with varying levels of difficulty. PLEASE USE YOUR OWN DISCRETION WHILE RIDING THIS BIKE, AS IT ALL DEPENDS ON RIDER SKILL WHILE DESCENDING

Please refer to the RockShox website for more information on proper pressures and tuning for your fork and rear shock.

The Current EXP weighs 53lbs while the Current ADV weighs 56lbs.

Yes, both the Current EXP and ADV have waterproof ratings of IPX6 and the Ultro X motor has a waterproof rating of IP67, meaning that the bikes can handle direct streams and some submersion

Aventon does not sell conversion kits. All Aventon bikes are already designed with electrical components, such as integrated batteries, motors, and sensors for an optimal riding experience.

Taking care of your ebike battery is an integral part of getting the most out of your Aventon ebike. Here are a few things to remember:

1. 1. Charge your battery regularly to avoid fully draining your battery’s stored energy or voltage.
2. 2. Use the right charger. Only use an Aventon branded and proper model charger (Be sure to place the charger brick on a flat, non-flammable surface like metal or concrete. The charger brick will conduct heat while charging.)
3. 3. Avoid overcharging your ebike.
4. 4. Avoid extreme temperatures. Store and charge the battery in a climate-controlled area, keeping it away from both extreme heat and cold.
5. 5. Maintain the right level of charge. The battery should be stored at 75% charge to its health.
6. 6. Avoid heavy loads. Do not exceed the bike’s recommended maximum capacity.
7. 7. Keep your battery, terminal, & ports clean.

Some Aventon models, such as the Level 2, Level 3, Abounds, Sinch 2, & Aventure 2, come with pre-installed fenders and a rear rack. Additional accessories are available for purchase. Explore a wide-range of Aventon accessories, including helmets, locks, bike pumps, and so much more to add to your next riding adventure.

All Aventon-branded frames, framesets, components, and batteries come with a 2-year warranty. Learn more about the Aventon warranty.

Electric bikes require regular maintenance tune-ups similar to traditional bikes and cars. To get the best performance out of your ebike, regularly check tires, tubes, chains, battery, and brakes, or visit a local bike shop for professional assistance. Performing a pre-ride safety check helps maintain your ebike, as well as staying up-to-date on non-electric component maintenance and repairs.

The torque sensor design is more intuitive for the rider at high and low speeds, it’s more efficient, has smoother power delivery, and is less prone to damage as the sensor is internal opposed to the external cadence sensor.